Universal Repeater Mode Status Screen - ZyXEL Communications WAP3205 User Manual

Wireless n access point
Hide thumbs Also See for WAP3205:
Table of Contents

Advertisement

Chapter 8 Universal Repeater Mode

8.5 Universal Repeater Mode Status Screen

Click
Figure 43 Status: Universal Repeater Mode
The following table describes the labels shown in the Status screen.
Table 23 Status Screen: Universal Repeater Mode
LABEL
Logout
Device Information
Host Name
Firmware Version
Sys OP Mode
LAN Information
MAC Address
IP Address
84
to open the status screen.
DESCRIPTION
Click this at any time to exit the Web Configurator.
This is the System Name you enter in the Maintenance > General
screen. It is for identification purposes.
This is the firmware version and the date created.
This is the device mode
is set - Universal Repeater Mode.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
(Section 3.1.2 on page
29) to which the WAP3205
WAP3205 User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents