Wps - ZyXEL Communications WAP3205 User Manual

5.6.2 WPS

Use this screen to add a wireless station to the network with the WAP3205's first
SSID using WPS. Click WPS in the Wireless Security to open the following
screen.
Figure 25 Wireless Security: WPS
The following table describes the labels in this screen.
Table 10 Wireless Security: WPS
LABEL
Wireless
Security
WPS
WAP3205 User's Guide
DESCRIPTION
Click this to go back to the Wireless Security screen.
Create a secure wireless network simply by pressing the button.
The WAP3205 scans for a WPS-enabled device within the range and
performs wireless security information synchronization.
Note: After you click the WPS button on this screen, you have to
press a similar button in the wireless station utility within 2
minutes. To add the second wireless station, you have to
press these buttons on both device and the wireless station
again after the first 2 minutes.
Chapter 5 Easy Mode
57