What You Need To Know; Setting Your Wap3205 To Universal Repeater Mode - ZyXEL Communications WAP3205 User Manual

Wireless n access point
Hide thumbs Also See for WAP3205:
Table of Contents

Advertisement

Chapter 8 Universal Repeater Mode
• Use other Wireless LAN screens
wireless settings and wireless security between the wireless clients and the
WAP3205.

8.3 What You Need to Know

With the exception of the Wireless LAN > Universal Repeater screen, other
configuration screens in Universal Repeater mode are similar to the ones in Access
Point Mode. See
User's Guide.
8.4 Setting your WAP3205 to Universal Repeater
Mode
Connect your computer to the LAN port of the WAP3205.
1
The default IP address of the WAP3205 is "192.168.1.2". In this case, your
2
computer must have an IP address in the range between "192.168.1.3" and
"192.168.1.254".
Click Start > Run on your computer in Windows. Type "cmd" in the dialog box.
3
Enter "ipconfig" to show your computer's IP address. If your computer's IP
address is not in the correct range then see
information on changing your computer's IP address.
After you've set your computer's IP address, open a web browser such as Internet
4
Explorer and type "http://192.168.1.2" as the web address in your web browser.
Enter "1234" (default) as the password and click Login.
5
Type a new password and retype it to confirm, then click Apply. Otherwise, click
6
Ignore.
The Easy mode appears. Click Expert Mode in the navigation panel.
7
82
(Chapter 10 on page
Chapter 11 on page 115
97) to configure the
through
Chapter 12 on page 121
Appendix C on page 163
WAP3205 User's Guide
of this
for

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents