ZyXEL Communications WAP3205 User Manual page 170

Appendix C Setting up Your Computer's IP Address
• Click Advanced.
Figure 97 Windows XP: Internet Protocol (TCP/IP) Properties
If you do not know your gateway's IP address, remove any previously installed
6
gateways in the IP Settings tab and click OK.
Do one or more of the following if you want to configure additional IP addresses:
• In the IP Settings tab, in IP addresses, click Add.
• In TCP/IP Address, type an IP address in IP address and a subnet mask in
Subnet mask, and then click Add.
• Repeat the above two steps for each IP address you want to add.
• Configure additional default gateways in the IP Settings tab by clicking Add
in Default gateways.
• In TCP/IP Gateway Address, type the IP address of the default gateway in
Gateway. To manually configure a default metric (the number of transmission
hops), clear the Automatic metric check box and type a metric in Metric.
• Click Add.
• Repeat the previous three steps for each default gateway you want to add.
170
WAP3205 User's Guide