Wireless Lan Advanced Screen - ZyXEL Communications WAP3205 User Manual

Table 35 Network > Wireless LAN > MAC Filter
LABEL
Policy
Add a
station Mac
Address
MAC Filter Summary
Delete
MAC
Address
Apply
Cancel

10.7 Wireless LAN Advanced Screen

Use this screen to allow wireless advanced features, such as the output power,
RTS/CTS Threshold and high-throughput physical mode settings.
Click Network > Wireless LAN > Advanced. The screen appears as shown.
Figure 56 Network > Wireless LAN > Advanced
WAP3205 User's Guide
DESCRIPTION
Define the filter action for the list of MAC addresses in the MAC Address
table.
Select Disable to deactivate the MAC filtering rule you configure below.
Select Allow to permit access to the WAP3205, MAC addresses not listed
will be denied access to the WAP3205.
Select Reject to block access to the WAP3205, MAC addresses not listed
will be allowed to access the WAP3205
Enter the MAC addresses of the wireless station that are allowed or denied
access to the WAP3205 in these address fields. Enter the MAC addresses in
a valid MAC address format, that is, six hexadecimal character pairs, for
example, 12:34:56:78:9a:bc. Click Add.
Click the delete icon to remove the MAC address from the list.
This is the MAC address of the wireless station that are allowed or denied
access to the WAP3205.
Click Apply to save your changes back to the WAP3205.
Click Cancel to reload the previous configuration for this screen.
Chapter 10 Wireless LAN
107