Site Survey Screen - ZyXEL Communications WAP3205 User Manual

Chapter 7 Client Mode
The following table describes the labels in this screen. .
Table 20 Client Mode: WLAN > Profile: WPA-PSK/WPA2-PSK
LABEL
Wireless Setup
Profile Name
Network Name
(SSID)
Security
Security Mode
Encryption Type Select the type of wireless encryption employed by the access point to
Pre-Shared Key
Apply
Cancel

7.7 Site Survey Screen

Use this screen to scan for and connect to a wireless network automatically. Go to
Configuration > Wireless LAN > Site Survey to open the following screen.
Figure 39 Client Mode: WLAN > Site Survey
78
DESCRIPTION
Enter a descriptive name for this profile.
Enter the name of the access point to which you are connecting.
Select WPA-PSK or WPA2-PSK to add strong security on this wireless
network.
which you want to connect.
WPA-PSK or WPA2-PSK uses a simple common password for
authentication.
Type the pre-shared key employed by the access point to which you
want to connect.
Click Apply to save your changes back to the WAP3205.
Click Cancel to go back to the previous screen.
WAP3205 User's Guide