Wap3205 V2 Access And Login - ZyXEL Communications WAP3205 User Manual

Chapter 13 Troubleshooting

13.2 WAP3205 v2 Access and Login

I don't know the IP address of my WAP3205 v2.
The default IP address is 192.168.1.2.
1
If you changed the IP address and have forgotten it,
2
• and your WAP3205 v2 is a DHCP client, you can find your IP address from the DHCP server. This
information is only available from the DHCP server which allocates IP addresses on your network.
Find this information directly from the DHCP server or contact your system administrator for
more information.
• reset your WAP3205 v2 to change all settings back to their default. This means your current
settings are lost. See
resetting your WAP3205 v2.
I forgot the password.
The default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
116.
I cannot see or access the Login screen in the Web Configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.2.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
don't know the IP address of my WAP3205 v2.
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
2
Start Guide.
Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java
3
enabled. See
Make sure your computer is in the same subnet as the WAP3205 v2. (If you know that there are
4
routers between your computer and the WAP3205 v2, skip this step.)
• If there is a DHCP server on your network, make sure your computer is using a dynamic IP
address. See
• If there is no DHCP server on your network, make sure your computer's IP address is in the
same subnet as the WAP3205 v2. See
114
Section 13.4 on page 116
(Section 11.4 on page
Appendix A on page 119.
Section 11.4 on page
in the Troubleshooting for information on
102), use the new IP address.
102.
Appendix B on page 129.
Section 13.4 on page
I
WAP3205 v2 User's Guide