P6Km4-4M12, 4 X Poe M12 (Slot C) - GarrettCom MAGNUM MAGNUM 6KM Hardware Installation And User's Manual

Magnum 6km series mobile ethernet switch
Table of Contents

Advertisement

Magnum 6KM Mobile Ethernet Switch Installation and User Guide
5.1.3

P6KM4-4M12, 4 x PoE M12 (Slot C)

The 6KM is available with the option of having PoE capabilities on the four
M12 ports in slot C. This is used in conjunction with 6KMP-48VDC to add an additional
four PoE ports to the existing four PoE ports in slot A.
The PoE (Power-over-Ethernet) M12 ports are similar to regular M12 ports,
except they have the capability of providing power on each port to power up attached PD
devices, per the IEEE802.3af PoE standard. The power-pass-through PoE ports are
dependent upon the -48VDC input power to supply the PD power for these M12 (10/100)
ports. Each port supplies up to 15watts to power attached PoE PD devices.
The LEDs on the PoE ports are slightly different compared to regular (non-
PoE) M12 ports. When the PoE port is in use, the PoE LED is ON when connected
properly to an IEEE 803.af compliant PD device on that port. When non-PoE devices are
connected, the PoE LED is OFF. Operation of Ethernet data traffic is not affected by
PoE.
PoE LEDs Summary
For PoE devices, each M12 PoE port supports only 802.3af complaint devices.
The PoE LED is ON when the attached PD is drawing power from the port.
The power is supplied on the data pairs, per IEEE802.3af PoE standard.
For non-PoE devices connected, the PoE port will act as a normal M12 port
and the PoE LED is OFF. No power is sent out from the port.
The PoE ports in Magnum 6K's with 48VDC power input act as a pass-
through, so the 48VDC power input source to the Magnum 6KM must be
strong enough to provide power to the 6K switch and to all 4-M12 ports with
PD devices connected (up to 15 watts per PoE port).
In the case where the 48VDC power in not internally connected to the POE port pins and
no power is coming to the PoE ports for some reason, all the PoE port LEDs are ON
simultaneously to indicate a trouble condition. The ports will still operate properly for
data traffic to non-PoE devices.
www GarrettCom com
.
.
28
07/10

Advertisement

Table of Contents
loading

Table of Contents

Save PDF