External Display - Panasonic CF-W4 Series Reference Manual

External Display

You can connect an external display to use a large screen, or connect an LCD projector to
give a presentation.
For explanations of display mode terminology, refer to "Read Me First" (
1
Power off your computer.
(⇒ Operating Instructions "Starting Up/Shutting Down")
Do not use the standby or hibernation function.
2
Connect the external display to the external display port (A) on your
computer.
3
Turn on the external display, then turn on your computer.
4
Change the display destination.
There are two methods to change the display destination. Do not switch using any
other method (screen properties, etc.).
Press the Fn+F3 key. (
• Extended Desktop switching cannot be used.
• Do not press any keys or slide the power switch until the display
destination has changed completely.
Use [Mobile Intel(R) 915GM/GMS, 910GML Express Chipset Family Properties]
screen.
Click [start] - [Control Panel], and from the [See Also] area click [Other Control
A
Panel Options].
Click [Intel(R) GMA Driver for Mobile] - [Devices].
B
page 19)
112
page 4).