Accessories
Setup possibilities
Table Stand
Floor Stand C 22/26
Wall Mount Flex 26 S
Connect 26
n Table Stand (delivery status)
n Floor Stand C 22/26
n Wall Mount Flex 26 S (see note in right-hand column)
- 98
Instruction for wall installation
Please not the following points when using a wall holder:
See the disassembly sketch. Place the TV set on a soft underlay on a
table as shown.
Remove the four screws. Remove the Table Stand.
IMPORTANT: The bottom two screws must be screwed back in afterwards
to stabilise the set:
Now mount the wall holder as described in the installation instructions.