External Devices; Connections Menu - Loewe Connect 26 LED Operating Instructions Manual

External devices

Connections menu

Settings for the connection of external appliances are made in this menu.
Calling the connections menu
MENU: Call TV menu.
 Select Connections,
 go to the menu line below.
 Select the desired setting.
Explanations of setting possibilities in the Connections menu:
Sound The sound components wizard helps you to configure the
components components which are used to reproduce the TV sound.
You will find a description of the sound components
wizard on page 79.
Antenna DVB Here you can set the parameters of the DVB-T and the
DVB-S (1 antenna with the antenna wizard. The setting
options of the DVB antennas are described in the first
time operation routine (from page 22).
AV connecting See right column for explanations.
settings
Miscellaneous See page 73 for explanations.
(1 Equipment and upgrade options, see page 97.
- 72
AV connection settings
In the AV connection settings menu the parameters for the AV and AVS
connection sockets can be adapted.
Calling AV connection settings
MENU: Call TV menu.
 Select Connections,
 go to the menu line below.
 Select AV connecting settings,
 go to the menu line below.
 Select the desired setting.
Explanations of setting possibilities in the AV connecting settings menu:
Device at Indicate here whether a set and, if yes, which one is con-
connection AV nected to the AV socket.
AV standard You set the AV standard of the connected appliance to
AV or AVS here.
Normally you leave the setting on Automatic. If the
standard of the connected appliance is not detected
automatically, select the right standard.
Ask your dealer or consult the operating manual of the
connected appliance if necessary.
Signal type You set the signal type of the device connected to AV
or AVS here. Normally, you should leave the setting at
Automatic; otherwise select a suitable signal type. You
can find out more from your dealer.
Allow If this function is activated and you switch an AV device
switching (not at AVS) that outputs a switching voltage to playback,
voltage its picture and sound will be played immediately on all
TV station slots.
RGB fade-in
If this function is activated, pictures from RGB-capable
at AV
AV equipment connected to AV are shown immediately
on all station places.
In some appliances it may be additionally necessary to
set the allow switching voltage menu item to yes to get
the external picture.