Assignment Of The Digital Audio Input; Audio Connection In Hdmi/Dvi Devices; Serial Interface (Rs-232C) (Retrofittable) - Loewe Connect 26 LED Operating Instructions Manual

External devices

Assignment of the digital audio input

In order to be able to hear the digital sound of an external device con-
nected to an AV input, an AV input can be assigned to the digital audio
input socket AUDIO DIGITAL IN. When switching to this AV input, the
digital audio signal applied to the AUDIO DIGITAL IN input is passed on
to the digital audio output socket AUDIO DIGITAL OUT. You will then
hear the digital sound of the assigned AV input instead of the analogue
sound if available.
Connecting devices to the digital audio input
For the digital audio playback from an external device, e.g. the DVD player,
you have to feed the digital audio signal to the TV set.
The external, digital audio signal can be played through an externally
connected, digital audio amplifier. This must be logged into the Sound
component wizard (see page 80).
➠ If an external audio amplifier or Loewe Individual Sound
Projector is used, this must be registered in the sound
components wizard (see page 80).
MENU: Call TV menu.
Select Connections,
 go to the menu line below.
Select Miscellaneous,
 go to the menu line below.
Select Assign digital audio input,
 go to the menu line below.
Select AV input.
To connect a DVD player to the digital audio input of the
TV set for example, connect the digital output socket of
the DVD player (DIGITAL OUT) via a cinch cable to the
AUDIO DIGITAL IN socket on the TV set.
Connection example for a DVD player, see right hand
column.
DVD player
DIGITAL
AV
OUT

Audio connection in HDMI/DVI devices

External devices with DVI connection
If an external device with DVI interface is connected via a HDMI/DVI
adapter to one of the HDMI sockets of the TV set, you can connect the
digital sound of the external device to the digital audio input socket
AUDIO DIGITAL IN.
The assignment of the digital audio input to the corresponding HDMI
socket of the TV set takes place as described in the column on the left.
If you want to use the analogue sound of the external device, connect
it to the AUDIO IN socket.
External devices with HDMI connection
If external devices with an HDMI interface are connected to one of the
HDMI sockets of the TV set, no assignment of the audio input is necessary
because the digital transmission of picture and sound takes place via a
single connection in HDMI.

Serial interface (RS-232C) (retrofittable)

You can connect a home network system of different manufacturers (e.g.
AMX, Crestron) to your TV set via the RS-232C interface.
Please consult your dealer for configuration of the RS-232C interface and
further information about the different home networking systems.
TV set
AV
AUDIO
DIGITAL
IN
81 -