Configure Picture In Picture (Pip) Mode - Loewe Connect 26 LED Operating Instructions Manual

Picture in Picture

Configure Picture in Picture (PIP) mode

You can set different parameters for the picture in picture mode in the
PIP menu.
Open the PIP menu
➠ PIP mode started,
if not, press PIP button.
➠ The frame is green,
if not, press the green button.
MENU: Call PIP menu.
Explanations of the setting options in the PIP menu:
➠ Note restrictions for the PIP mode (see page 44).
Type You can select whether you want to see your second pic-
ture as a superposed Small PIP or as Split screen picture
which takes up the right hand half of the screen (see also
right hand column).
➠ The Position menu item only appears if the Small PIP
Position
type was selected.
You can determine the position of the small picture here
upper left, bottom left, bottom right, upper right).
Without a screen display the position can also be changed
with the menu control buttons (see right hand column).
Switch PIP Type (Small PIP / Split screen)
➠ PIP menu is opened.
 Select Type,
 go to the menu line below.
 Select Small PIP or Split screen.
Change position of Small PIP
➠ Other than the status line, which may possibly be
displayed, no other display is shown on the screen:
Move the PIP into a corner of the screen.
The position of the small picture can also be selected
under Position in the PIP menu (see left hand column).
45 -