Loewe Connect 26 LED Operating Instructions Manual page 33

Daily operation
Explanations of the sound settings:
more ...
Loudspeaker/ Selection possibility Mono/Stereo or Sound 1 or Sound
Headphone 2 for two-sound broadcasts separately for speakers and
sound headphones. Only available for analogue stations.
Auto Volume Reduces volume differences, e.g. for advertisements that
are too loud.
AV output You can indicate here which sound is output via the AV
signal socket for dual sound programmes: Sound 1 (e.g. main
language), sound 2 (e.g. foreign language), or sound 1+2
(both simultaneously).
Maximum Determining the maximum volume that can be set.
volume
max. switch on Specify the volume that is set when switching on the TV
volume set with the mains switch.
If the volume is higher when switching the TV set to the
standby mode than specified here, then it is reduced
automatically to the fixed maximum switching on volume
when it is turned on again.
Volume The volume can differ according to the individual stations.
adjustment for If the sound is too loud or too quiet in relation to other
current station stations, adjust the volume. When the menu is open, you
can select the stations one after another with P+/P– and
adjust every single station conveniently.
Set stereo balance so that the volume impression is identical
Balance
on the left and right.
Auto speech If the automatic speech detection is activated, the sound
detection of the current programme is automatically output with
optimum comprehensibility when speech is detected.
33 -