Loewe Connect 26 LED Operating Instructions Manual page 42

Managing stations
Change, delete, move, rename, restore station
➠ Change station can also be called via the station list (page 30).
➠ If at least one station is locked the access code must
be entered before changing stations start-up (see
Parental lock on page 52).
➠ In some TV broadcasting networks (e.g. FreeView) you
are not allowed to move or rename stations. Use
Favourites instead.
Call TV menu.
 Select Settings,
 go to the menu line below.
 Select Stations,
 go to the menu line below.
 Select Change stations,
OK call list of stations.
In this menu you can delete, move, rename or restore
stations.
or numeric buttons:
Select the appropriate station.
Scroll with P+/P– if necessary.
Delete station
Red button: Starts Delete station.
Select several stations to be deleted if necessary,
OK to execute the delete.
Move station / Change order
➠ Stations can only be resorted within the signal source block.
Yellow button: Starts Move station.
 Mark several stations if needed,
OK selection ended,
Select insertion position from which the selected
stations are to be inserted,
OK to execute the move.
- 42
-
Rename station
➠ DVB stations for which the station name is also broadcast
cannot be renamed. In this case, the Rename function
is hidden.
Blue button: Starts Rename station.
Under the 1st letter of the name you will see a line indi-
cating the current input position.
 Input position one character to the right (also for
blanks).
 Input position one character to the left.
Enter the letters one after another with the numeric
buttons on the remote control. Like using a mobile phone
keypad, press a numeric button until the desired character
appears. The available letters are printed respectively on
the buttons. Different special characters can be selected
with button 1.
Green button: Switch upper/lower case letters.
Yellow button: Deletes the character before the input
position.
Blue button: Cancel rename.
OK to save new name.
Restore stations
Stations which have been deleted from the station list can be restored.
Green button: Starts Restore stations.
Select station,
OK station is restored.
The restored station is sorted in according to its signal
source at the end of the respective signal block.