Using A Roasting Or Baking Program And/Or Core Temperature Probe With; Time Delay; Storing An Additional Program; Switching The Oven Off - Kuppersbusch EEB 970.0 Instructions For Use And Installation Instructions

Using a roasting or baking program and/or
core temperature probe with time delay
The cooking time is pre-set for the roasting and baking programs. If you
use the core temperature probe, the cooking duration is determined when
the core temperature has been reached.
You merely need to set the preselection time.
- Keep the button minute minder
- Set the preselection time you want with the control knob.
The time set in minutes appears in the display on the left of the button
and at the same time as a time of day in the time display.
The symbol (on the right beside the control knob) lights up green.
After 3 seconds the oven goes into the waiting mode.
- Afterexpiry of the set preselection time the oven switches itself on
automatically with the pre-set program.

Storing an additional program

Your oven has a Memory Function with which you can store two pro-
grams you have created yourself as additional programs. These
programs are stored under the symbols A and B.
- Select a baking, roasting or heating program and set the temperature
and the time you want.
&
- Keep the memory button
- Select the symbol A or B with the control knob.
- After you release the memory button
under A or B.
The additional program you have stored can be overwritten if you want to
store a different program.
The additional programs can be used in the same way as the heating,
baking and roasting programs.

Switching the oven off

- Touch the Off button ( .
The control lamp in the On button goes out.
The symbols for the programs are no longer illuminated. All functions of
the oven are de-activated.
EEB 970.0
depressed.
depressed.
&
, the program is stored
Should you accidentally switch off the oven and thus interrupt the running
programme, switch the oven on again immediately. The programme continu-
es to turn from the point where it was interrupted provided that the oven
door has not been opened.
The oven has an operating time limit (safety limit). Should you ever forget
to switch the oven off, it switches itself off automatically after about 6
hours.

Positioning possibilities

The oven has on both sides grids each with 8 rails. They form the shelf
levels 0 to 7.
The shelf levels are counted from the bottom up (see diagram).
The drip tray or a pizza tray, for example, can be inserted into the level 0.
The gridiron and/or the baking trays can be inserted into the levels 1 to
7 depending on the application.
You will find information on the shelf levels under the relevant applications
and in the reference value tables.

Slide-in parts

Do not cover the oven bottom with aluminium foil!
Baking trays: Raise slightly when removing them.
When pushing them into the oven again, the inclined edge of the trays
must face towards the oven door.
Push grease drip tray and baking tray into the oven with the two slots at
the back.
Gridiron: Please ensure that the catches of the racks always point towards
the back (away from you).
29