– Remove labels, accessories and packaging from the oven. – Clean the appliance before preparing food for the first time. Clean the drip pan, oven rack etc. with a damp cloth and a solution of warm water and a non-abrasive detergent. Dry the interior with a soft cloth.
“0”. The light stays off when the mode switch is depressed. The oven light functions regardless of which mode is selected. The light can also be turned off while the oven is in use. This will save energy and increase the life of the halogen lamps.
Drip pan: rack level 1, oven rack: rack level 2 Roasting on the oven rack Cook large roasts directly in the drip pan or on the oven rack with the drip pan inserted underneath (i.e. turkey, 3-4 chickens). Turn the roast after 2/3 of the cooking time unless you are using the Hot...
Baking pizzas on the pizza stone – Prepare the pizza dough as described above. – Place the pizza stone on the oven rack and insert at rack level 0. – Preheat the oven in Pizza mode – Dust the lifter with flour before placing the dough on top. Add toppings quickly so the dough doesn’t become moist.
12-14 Vegetables and meat 10-11 10-12 – When the liquid starts to bubble, turn the oven down to 210 °F / 100 °C and continue to heat for 30-60 more minutes. 9-11 9-12 – Then switch off the oven and keep the jars in the closed oven for another...
Oven racks with cross bars should point toward the front. – Place the trays and oven racks with the back edge on the front side of the glide-out shelf and push into the oven. Don’t clasp the holes in the back of the oven. The holes don’t have any...
Look on p. 13 to learn how to use the core temperature function. The electronic timer is a short-time alarm and also controls the oven in several other ways. You can use it to set the cooking time, the finish time and the core temperature.
– Set the temperature and mode. Setting the finish time (switch-off function) Use this function if you want the oven to switch off automatically after a certain time. – Press “ ”: the light will flash and display will show the normal clock.
In the left display you can see the preset temperature of 158 °F / 70 °C, which you can change. – Close the oven door and set the core temperature function. Setting the core temperature function This function will only work when the roasting thermometer is inserted.
Don’t spray into the opening of the ventilator at the backplate! 50-55 For environmental reasons, we do not recommend the use of oven sprays. If 60-65 you do use one, only use it in the oven interior and on enamel baking trays. 80-85 70-75 85-90 70-80 EEB 9600.0 USA...
Use a cleaning scraper for glass ceramic surfaces to remove heavy dirt. Door front, control panel Clean the front of the oven, by using a damp cloth or soft sponge with a mixture of warm water and mild detergent. You may use glass cleaning agents.
® Regenerating the ökotherm – Set the mode selector to Hot air convection – Set temperature control to “ ”. – Heat the empty oven for 60 minutes. catalyst EEB 9600.0 USA...
Always have the information from the identification panel handy when Switch off the appliance, calling Customer Service. call Customer Service. The rating label for the oven is located on the See page 15. right-hand side strip and is visible when the oven door is open.
Page 20
ÜPPERSBUSCH 112 N. East Street, Suite C Tampa, Florida 33602 Telephone: 813-229-7096 Fax: 813-229-0982 Customer Care line: 1 - 800 - 459 - 0844 www.kuppersbuschusa.com is a brand of Teka USA, Inc. ÜPPERSBUSCH...