Activating The Children's Safety Device; Switching Off The Children's Safety Feature; The Oven Lighting; Using The Oven - Kuppersbusch EEB 970.0 Instructions For Use And Installation Instructions

Children's safety feature
Your oven has a children's safety feature which you can activate to prevent
inadvertent or unauthorised use of the oven.

Activating the children's safety device

You activate the children's safety feature with the button identified with the
?
key . This safety feature can only be switched on when the appliance
is switched on.
- Touch the button children's safety feature button
The following three control lamps flash :
)
- Button oven On
.
- Button automatic cut-out minute minder
- Button core temperature probe
The children's safety feature locks the setting of the oven. The existing set-
tings are retained. The temperature can only be reduced. New temperature
settings are not possible. The appliance can also be switched off with the
safety feature activated.
When the appliance is switched on again, all functions remain off.
You can only see that the children's safety feature is activated when the
oven is switched on.
In order to be able to use all the functions of the oven again, the children's
safety feature must be de-activated.

Switching off the children's safety feature

This is performed with the buttons of the three flashing control lamps.
- Touch these three buttons simultaneously
or
- the two bottom buttons first and then the top button.
An acoustic signal is emitted when the children's safety feature is de-
activated. The control lamps stop flashing. The cooker is fully operable
again.

The oven lighting

The oven lighting is switched on when the pop-out control knob has not
popped out.
The lighting works independently of the choice of mode.
The lighting can also be switched off when the oven is in use. You thus
save energy and prolong the service life of the halogen lamps.
EEB 970.0
?
.
.
!
.
- If the control knob is pushed in,
the lighting is off.
- If the control knob is out, the
lighting is on.

Using the oven

Observe the safety notes on page 26!
Your cooker has twelve heating programs and twelve roasting and baking
programs. You merely select the appropriate symbol on the control panel
by turning the knob.
The oven is only on when the oven door is closed.
While the oven is in use, it becomes hot. When the oven is hot, the cooling fan
runs - even when the oven is switched off.

Switching the oven on

- Touch the On button
A control lamp in the On button shows that the oven is ready for use.
All symbols on the control panel are backlit in green.
If, after the oven has been switched on, no other function is selected, an
acoustic signal is emitted after 10 seconds. After another 10 seconds the
oven switches itself off again.

Selecting a program

How to change the pre-set temperatures and cooking times is explained in
the following sections.
27
)
.
- Select the symbol of the program
you want with the control knob
(by turning to the left or right). The
symbol of the selected program
lights up red.
The oven starts up after 3 seconds.
This is indicated by an acoustic
signal.
- The oven only heats up when the
oven door is closed. It does not
heat up when the door is open.
The pre-set temperatures and times
appear in the relevant displays.
During program selection all
programs are run through, including
the additional programs stored
under the symbols A and B.
Each heating program (symbols
on the right) runs at a pre-set coo-
king temperature . You set the
duration yourse.
Each baking and roasting pro-
gram (symbols on the left) runs at
a pre-set cooking temperature
and cooking time.