Dataprobe iBoot-G2+ Manual page 23

User Disabled: There is no User account. The Admin username and password will be required for operation
and setup functions across all modes of operation. This is the factory default mode.
Two passwords are used by iBoot. In the Login Required mode, The User Password allows access to the
control of iBoot, but not to the Setup functions. Clicking on the Setup button allows the Administrator to log in.
Passwords can be up to 20 characters long and are case sensitive.
Enter the current password then the new password twice to confirm.
Default Credentials
Role
Administrator
User
V130108E
Username (fixed)
admin
user
iBoot-G2+
Password (user set)
admin
user
Page 23