Intel Pentium OverDrive Processor with MMX Technology Installation Manual page 7

Step 5—Unplug the fan power cable or unfasten
the heat sink clip.
The heat sink on your computer's original processor is either clipped to the
socket or fastened directly to the top of the processor. If the heat sink is
fastened directly to the processor without a clip and doesn't have a fan
cable, go to step 6 now.
Unplug the fan power cable
Some computers have a power cable attached to the fan. Carefully unplug
the fan power cable from the power source.
System power
source cable
You do not need the fan, fan cable, or clip to install the
Pentium OverDrive processor with MMX technology.
After removing these parts, store them with your
original processor.
After unplugging the fan power cable, carefully fold the
power source cable out of the way so it doesn't touch
any computer components.
Fan power cable
PC-3252
8
After unplugging
the fan power
cable from the
computer power
source, fold the
computer power
source cable out
of the way.