Pausing Or Restarting; Changing Cycles, Options And Modifiers; Status Lights - Kenmore 592-491070 Owner's Manual And Installation Instructions

Pausing or Restarting

1. To pause the washer at any time, press the Start/Pause
button.
2. To continue the cycle, press the Start/Pause button.
Changing Cycles, Options and Modifiers
Not all Options are available with all Cycles.
Cycles and Options can be changed anytime before START is
selected.
To stop a cycle and select a new cycle
1. Press the Start/Pause button.
2. Select desired cycle.
3. Select the desired OPTIONS.
4. Press the Start/Pause button to restart the washer at the
beginning of the new cycle..
To cancel a cycle
1. Press the Start/Pause button.
2. The washer powers down, the door unlocks, and clothes can
be removed.
NOTE: If the water level or the temperature is too high, the
washer will drain automatically before the door unlocks.
To change Options after the cycle has started
1. Press the Start/Pause button.
2. Select the desired OPTIONS. If the option is not available,
the machine will beep.
3. Press the Start/Pause button to continue the cycle.
To drain the washer manually
1. Press the Start/Pause button.
2. Select SPIN ONLY.
3. Press the Start/Pause button to begin the drain.
4. When the spin is complete, the door unlocks. Items can be
removed from the washer.
16
Kenmore_Washer_Good-02681B-02_EN.indd 16

Status Lights

These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional
item to the wash cycle and when the controls are locked.
Adding items
You can add or take out laundry items even after the wash has
started, as long as the "Garment+" light is on. Pushing the Start/
Pause button unlocks the door, unless the water is too hot or if
there is too much water in your Washer. If you are able to unlock
the door and wish to continue the wash cycle, close the door
and press the Start/Pause button.
Locking controls
A function that prevents children from playing with your washer.
Once the Child Lock function is activated, the control panel
cannot be activated, preventing children from playing with the
washer.
Activating/Deactivating
If you want to activate/deactivate the Child Lock function,
press the Soil Level and Signal buttons at the same time for 3
seconds.
How It Works:
1. To activate or deactivate the Child Lock function, press and
hold both the Soil level and Signal buttons for 3 seconds.
Activation/Deactivating the Child Lock function is only
available when the power is on.
2. When the Child Lock function is activated, and any button
except for the Power button is pressed, the buzzer will sound
for a short period and the "Child Lock" indicator will turn off
for 10 seconds.
3. The Child Lock function stays on even after the power
has been turned on and off or the power cord has been
disconnected and reconnected.
NOTE: When buttons, other than the Power button, do not
respond, please check if the Child Lock function is on.
2009-07-23 ¿ÀÈÄ 4:18:07