Write Protect; Memory Channel Write Protect; Write Protect During Memory Input; Channel Protect Status For Existing Memory Channels - AOR AR8200 Manual

Section 11, 11-1, 11-2, 11-3

(11) Write protect

It is possible to write protect memory channels, whole memory banks, search banks and 'globally protect'
memory to prevent data being accidentally over-written.

11-1 Memory CHANNEL write protect

It is possible to protect memories while writing new data, toggle the protect status of previously stored
memory channels and to delete all memory channel protect tags in one go.

11-2 Write protect during memory input

While in VFO mode, select a frequency then
access the memory input menu. Key in a three digit location for
memory storage or use the
to select channel number.
menu, add text as desired using the
position left and right,
character to the right.
PROTECT. The
off). When protect is ON, the memory channel cannot be overwritten while entering new memories or
when copying, swapping and moving specific memory channels.

11-3 Channel protect status for existing memory channels

Existing memory channel write protect status may also be toggled on/off via the EDIT menu.
"EDIT MEM-CH" menu. Key in a three digit location to recall the desired memory channel or use the
keys to select bank and main dial to select channel number.
(passing through MODE SET, FREQ SET, TEXT SET and on to PROTECT. The
keys may be used toggle write protect status on/off (default is off).
changes and exit the menu.
PROTECT - Quick method for several channels
If the required memory channel is recalled in memory read mode, you may move directly to the
PROTECT menu using the following key strokes:
menu. the
just recalled will be displayed). The
possible to select other memory channels by keying in a three digit location to recall the desired memory
channel or use the
98
keys to select bank and main dial
to move to the text input
keys to move the
blanks the line from the current
to move on to CHANNEL
key or the keys may be used toggle write protect status on/off (default is
to access the edit menu.
key eleven times to display the "MEM PROTECT" menu (the memory channel
keys to select bank and main dial to select channel number.
to
key is used toggle write protect status on/off. It is still
the key ten times to display the
the key four times
to access the edit
key or the
to save the