Toggling Memory Channel Pass; Removing All Memory Pass Tags In One Go - AOR AR8200 Manual

Section 7-5, 7-5-1, 7-5-2
unwanted channels so that they are skipped when scanning. PASS
does not delete the memory contents but simply 'tags' the channel
to be skipped. In memory read, the PASS tag may toggled on/off
and the tags removed in one operation using the delete pass
channel facility of the DELETE menu.
While paused (during scan) on a busy channel which you do not
currently wish to monitor, to skip it. The scan
process will immediately move on to the next memory channel of
the current bank in the direction (up or down) which has been
previously used for tuning or memory read. This tagged memory channel will be skipped during
subsequent scans until the tag is removed. The legend "PAS" will have been assigned to the skipped
memory channel which may be reviewed in memory read mode.

7-5-1 Toggling memory channel PASS

The key may also be used to tag (skip) unwanted channels when in memory
read. To cancel channel pass tag on a particular memory channel, recall it in memory
read mode then . The LCD legend "PAS" indicates when the channel
is locked out, the key toggles "PAS" on/off.

7-5-2 Removing ALL memory PASS tags in one go

It is possible to remove the memory PASS tags of ALL memory channels in all banks in one operation
using the DELET menu.
to access the DELETE menu. the key six times to display
the menu option "DEL MEM PASS".
Note: It will take a little while for the AR8200 to look for PROTECT channels and PASS
channels as you work through the menus.
If at least one memory channel has been tagged PASS, the third line from the bottom of the LCD will
display a memory location such as "PASS-CH A17" with the "A17" simply confirming that at least one
memory channel is tagged PASS. If no memory channels have been tagged PASS, the LCD will display
"PASS-CH ---".
To remove all memory PASS tags in one go , the legend "MEM PASS CH ALL OFF!!" will
be displayed to show that removal of pass tags is in process followed by "MEM PASS CH SEARCH !!" as
the AR8200 checks that all tags have been removed. The LCD will then display "PASS-CH ---" to
confirm that no channels are now tagged as PASS. To exit the menu and return to the standard display
.
65