Loading Stored Band Scope Traces From Memory - AOR AR8200 Manual

15-10 Loading stored band scope traces from memory

Providing a trace has been previously stored to memory, it is possible to recall it to display using the key
sequence . The legend "RCV" (in the place of "MKR") indicates that a
stored trace is currently being displayed.
The AR8200 will no longer sweep the frequency range but the key may still be used to monitor
the marker frequency. Key in a new centre frequency to return to a real time band scope.
It is possible to move the marker across the graphical trace using the keys. Waveform enlargement
is available by changing the frequency sweep width using the keys.
If the optional EM8200 is used, it possible to load any one of four
further traces from external memory. Refer to section 18-6-7 of
this manual for further information regarding this feature.