Em8200 Internally Stored Band Scope Save And Load - AOR AR8200 Manual

18-6-6 EM8200 SEARCH BANK save and load
The search data 'saved or loaded' can be specific to one bank only.
Save SRCH-BANK (one specific search bank)
Access the COPY EXT-MEM menu using the key sequence
Select the "SAVE" option,
bank you wish to save using the
left of the "ALL-DATA" legend, use the
the key to move the cursor to the right of the legend "SRCH-BANK" to enable selection
of the desired search bank to save. Use the main dial,
search bank.
to start the search data save. The legend "EXT-MEM SAVING !!" will be displayed
with the exclamation marks flashing to indicate that saving is in progress. The search save process will
take a couple of seconds to complete. Once the save is complete, the LCD will revert to its previous
display (VFO, scan or search etc).
Load SRCH-BANK (one specific search bank)
It is presumed that you have already saved search data to one of the four EM8200 memory locations.
Make sure that global write protect is not set or the data load will be unsuccessful and no data will be
loaded.
Access the COPY EXT-MEM menu using the key sequence
Select the "LOAD" option,
bank you wish to load using the
left of the "ALL-DATA" legend, use the
the cursor to the right of the legend "SRCH-BANK " to enable selection of the desired search bank to
load. Use the main dial,
to start the search data load. The legend "EXT-MEM LOADING !!" will be displayed
with the exclamation marks flashing to indicate that loading is in progress. The search load process will
take a couple of seconds to complete. Once the load is complete, the LCD will revert to its previous
display (VFO, scan or search etc).
18-6-7 EM8200 internally stored band scope
save and load
It is possible to save the internally stored band scope to the
EM8200 external memory locations 0, 1,
2, 3 or 4 using the "COPY EXT-MEM" menu. If a band scope
to toggle between load and save. Next select the EM8200
keys (0, 1, 2 or 3).
keys to select "SRCH -BANK".
to toggle between load and save. Next select the EM8200
keys (0, 1, 2 or 3).
keys to select "SRCH-BANK".
keys or keypad to select the desired search bank.
the key to move the cursor to the
keys or keypad to select the desired
the key to move the cursor to the
.
.
the key to move