Exiting Vfo Search; Vfo Environment Menu; Vfo Scan; Vfo Search Delay Environment - AOR AR8200 Manual

Section 4-3-6, 4-4, 4-4-1, 4-4-2

4-3-6 Exiting VFO search

To exit VFO search,
search was initiated will be displayed). Alternatively use the
search.

4-4 VFO environment menu

The VFO has a special menu to enable VFO scan to be toggled, VFO search to be customised, VFO
auto store to be toggled on/off, memory bank "J" (which is used as the target for auto store) to be deleted
and quick memory auto write to be configured.
Use the key sequence
The following options are available:
1.

VFO SCAN

2. DELAY
3. LEVEL
4. VOICE
5. FREE
6. AUTO STORE
7. DELETE J
8. QUICK MEMORY
You may abort the menu at any time by pushing
4-4-1 VFO SCAN
This facility is used while monitoring in 2VFO mode, the secondary VFO will be checked for activity at
specified intervals. VFO scan is toggled on/off via the VFO environment menu, use the key sequence
the status on/off, the default is off. Please refer to section 4-2 of this manual for further details of VFO
scan.
4-4-2 VFO search DELAY
The VFO search DELAY parameter affects the time the AR8200 will remain on an active frequency in
VFO search mode once the received signal has disappeared and the squelch has closed. This is
particularly useful for customising how long the receiver will wait for a reply before resuming VFO search.
For example, when communications are passed back and forth between a control tower
/ aircraft which may take a few seconds. The limits are OFF / HOLD and 0.1 to 9.9 seconds in 0.1s
increments (default 2.0 seconds).
46
to return to the VFO mode (the frequencies in use before VFO
ON / OFF (default off)
OFF / HOLD / 0.1 - 9.9 seconds (default 2.0s)
OFF / 1 - 255 (default OFF)
OFF / 1 - 255 (default OFF)
OFF / 1 - 60 seconds (default OFF)
OFF / ON (default OFF)
Delete bank J
OFF / 1- - 990 seconds (default OFF)
to access the VFO environment menu. Use the
or
to access the VFO environment menu.
.
keys to exit VFO
key to toggle