Config Contrast - AOR AR8200 Manual

The lamp may be configured in three ways:
AUTO
This setting is relevant when operating from internal batteries only. The lamp will automatically illuminate
when the front panel and side panel keys are used. The lamp will remain illuminated for a further five
second after the last key push and will then switch off. This is a good compromise setting for best
visibility and battery life.
CONT
This setting is relevant when operating from internal batteries only. The lamp will CONTinuously
illuminate the front panel and side panel keys. The lamp will only extinguish when the AR8200 is
switched off. Of course continuous operation of the lamp will drain the internal batteries more quickly.
OFF
This setting is relevant when operating from internal batteries only. The lamp remains permanently
extinguished, this is useful to maintain maximum battery life when used in areas of high light levels.
The LAMP is setup in the CONFIG menu. To access the config menu
.
keys to toggle the lamp between AUTO (default), CONT and OFF. The
as a short cut to AUTO.
to accept the data and return to a standard display. Alternatively
to abort entry or

14-3 CONFIG CONTRAST

The AR8200 is equipped with variable LCD contrast which is adjustable in 32 steps to provide best
visibility under different viewing angles, extremes of ambient light & temperature (and between sets due
to variation).
The default setting for contrast is 14. The display generally becomes too dark to read around 20 and too
feint around 02, the
The CONTRAST is setup in the CONFIG menu. To access the config menu
.
main dial or keys to vary the contrast level to achieve best visibility.
to accept the data and return to a standard display. Alternatively
to abort entry or
to move the cursor to the "LAMP" selection point. Use the main dial or
to move to the next item on the config menu (CONTRAST).
key may be used as a short cut to 14.
twice to move the cursor to the "CONTRAST" selection point. Use the
to move to the next item on the config menu (POWER-SAVE).
key may be used