Em8200 All-Srch Save And Load; Em8200 Search Bank Save And Load - AOR AR8200 Manual

bank you wish to save using the
the left of the "ALL-DATA" legend, use the
move the cursor to the right of the legend "MEM-BNK" to enable selection of the desired memory
bank to load. Use the main dial,
to start the memory data load. The legend "EXT-MEM LOADING !!" will be displayed
with the exclamation marks flashing to indicate that loading is in progress. The memory load process will
take a couple of seconds to complete. Once the load is complete, the LCD will revert to its previous
display (VFO, scan or search etc).

18-6-5 EM8200 ALL-SRCH save and load

It is not necessary to save and load all of the data at times when you do not wish your memory banks etc
over-written. Instead use ALL-SRCH to overwrite all search banks in one go but to leave the memory
banks etc unchanged.
Save ALL-SRCH (all search banks)
Access the COPY EXT-MEM menu using the key sequence
Select the "SAVE" option,
bank you wish to save using the
left of the "ALL-DATA" legend, use the
to start the search data save. The legend "EXT-MEM SAVING !!" will be displayed
with the exclamation marks flashing to indicate that saving is in progress. The search save process will
take a few seconds to complete. Once the save is complete, the LCD will revert to its previous display
(VFO, scan or search etc).
Load ALL-SRCH (all search banks)
It is presumed that you already have search data in one of the four EM8200 memory locations. Make
sure that global write protect is not set or the data load will be unsuccessful and no data will be loaded.
Access the COPY EXT-MEM menu using the key sequence
Select the "LOAD" option,
bank you wish to load using the
left of the "ALL-DATA" legend, use the
to start the data load. The legend "EXT-MEM LOADING !!" will be displayed with the
exclamation marks flashing to indicate that loading is in progress. The search load process will take a
few seconds to complete. Once the load is complete, the LCD will revert to its previous display (VFO,
scan or search etc).
keys (0, 1, 2 or 3).
keys to select "MEM-BNK".
keys or keypad to select the desired memory bank.
to toggle between load and save. Next select the EM8200
keys (0, 1, 2 or 3).
keys to select "ALL-SRCH".
to toggle between load and save. Next select the EM8200
keys (0, 1, 2 or 3).
keys to select "ALL-SRCH".
the key to move the cursor to
the
the key to move the cursor to the
the key to move the cursor to the
key to
.
.