Memory Write - AOR The New Classic AR3030 Operating Manual

AR3030 operating manual
To select memory mode press the [MEMO] key. The legend "MEMO" will
appear on the LCD to confirm selection.
Presuming data has been stored, in memory mode press [0][1] to select
memory channel 1, [0][2] for memory channel 2, etc.
Alternatively you may rotate the main rotary tuning control to select memory
channel. If no data has been stored then "empty" channels will be "skipped"
when turning the main rotary tuning control or when selected via the keypad.
While the legend "MEMO" is displayed along with a channel number, the
AR3030 will be actually receive the displayed frequency.
Return to VFO:
To return to VFO mode simply press the [VFO] key.
Transfer memory to VFO:
To transfer the current memory data to VFO press [MEMO] while the "MEMO"
legend is displayed on the LCD.
6-14 Memory write - [M.in] key
While tuning in VFO mode, you may wish to store an interesting or regularly
used frequency into memory so that it may be called upon quickly and
conveniently.
To store the current VFO data into memory (which includes frequency, mode,
AGC, ATT, TONE, BW, BFO status, tuning step) the [M.in] and [ENT/BS] keys
are used.
Automatic:
Press the [M.in] key and the AR3030 will automatically select the first lowest
number empty memory channel (unless they are all in use in which case
channel [00] is always selected). The memory channel number will appear on
the lower left hand side of the LCD and will flash to indicate memory write
mode.
Press the [ENT/BS] key to complete the sequence.
As the AR3030 automatically increments to the next available memory channel,
it is easy to keep the memory channel allocation sequential and tidy without
having to remember which channels have already been used.
33