Delete Memory Channel Pass - AOR AR8200 Manual

to exit the menu returning to the standard display, alternatively
to move to the next item in the menu "DEL MEM PASS".

10-6 DELETE memory channel pass

It is possible to remove the channel pass 'tags' from all memory channels in one go using the DELETE
menu.
While in search mode, the DELETE menu is accessed using the key sequence
, (while in SCAN or VFO mode use the key sequence
).
Note: The LCD will temporarily display "MEM PROTECT CH SEARCH !!" after the fifth
push (this takes a few seconds to clear) then push
temporarily display "MEM PASS CH SEARCH !!" as the AR8200 checks to see which
memory channels have PASS tags (if any).
The menu selection "DEL MEM PASS" will be displayed after a few seconds.
If any memory channels are tagged PASS, the legend "PASS-CH xx" will be displayed with the "xx"
number (00 to 99) indicating that data is present. If no memory channels are tagged PASS, the legend
"PASS-CH --" will be displayed. To delete all memory channel PASS tags
"PASS-CH --" confirms deletion.
If even a single memory channel is write protected, the PASS tags cannot be deleted, you must remove
the protection first. You may remove the write protection for all memory channels in one go, refer to
sections 10-5 & 11 of this manual.
to exit the menu returning to the standard display.
the key six times.
Section 10-5, 10-6
for the sixth time the LCD will
the key
, the legend
97