AOR AR8200 Manual page 12

Section 1-5-2
in 2VFO mode to access the VFO PASS menu which extends to include the
SEARCH bank pass edit menu.
menu.
PUSH to abort entry via the keypad.
to select the optional SLOT CARD when fitted.
and HOLD the
should the AR8200 appear to behave strangely... no memory contents will be lost.
Numeric figure one during frequency input. Selection of memory/scan bank "A" or "a" and search bank
"A" or "a" or "K" or "k".
operation.
operation.
Numeric figure two during frequency input. Selection of memory/scan bank "B" or "b" and search bank
"B" or "b" or "L" or "l".
Numeric figure three during frequency input. Selection of memory/scan bank "C" or "c" and search bank
"C" or "c" or "M" or "m".
automatically selected by the AR8200 microprocessor from the pre-programmed band plan data (this is
a short cut to save using the receive mode menu). The LCD legend "AUT" confirms that auto-mode is
in operation.
12
in 2VFO, SEARCH or SCAN mode to access the SELECT SCAN edit
key while powering On the AR8200 to soft reset the microprocessor
to toggle the attenuator on / off, the LCD legend "ATT" confirms
to toggle the noise limiter on / off, the LCD legend "NL" confirms
to access the tuning STEP size (increment) menu.
to access the receive mode selection menu.
to select AUTO-MODE where the receiver mode and tuning step are