Memory Data Setting; Memory Bank Resizing; Delete Memory Channel - AOR AR2300 Operating Manual

4-4-2 Memory data setting

MX MXnnmm GAn MPn MFnnnn.nnnnnn MDnn ATn ANn MTxxxxxxxxxxxx
Note: Refer to individual command for details of each field.
The MF, MT commands cannot be used alone.
They must always be used in conjunction with the MX command.
To read: MAnnmm<CR>
Response: MFnnnn.nnnnnn MTxxxxxxxxxxxx

4-4-3 Memory bank resizing

The AR2300 features 2,000 memory channels (50 channels in each of the 40 banks). If you
resize a memory which currently contains 50 channels to a new size of 10 channels, the last
40 channels will be deleted and data will be lost. Therefore, it is suggested that you need to
carefully organize your memory data before resizing memory channels.
MW
To read: MWnn<CR>
Response: MWnn MCnn TT xxxxxxxxxxxx
Note: The MC, TT commands cannot be used alone.
They must always be used in conjunction with the MW command.

4-4-4 Delete memory channel

MQ
35
nn: 00 ~ 39 (Memory bank)
MXnnmm:
mm: 00 ~ 49
n: 0, 1 (Memory select, de-select)
GAn:
0: de-select
1: select (default)
n: 0, 1 (Memory pass)
MPn:
0: no
1: yes
MFnnnn.nnnnnn
receive mode
MDnn:
RF attenuator / amplifier
ATn:
Antenna select
ANn:
MTxxxxxxxxxxxx: Memory tag (up to 12 characters)
MWnn MCnn TT xxxxxxxxxxxx
MWnn: Select memory bank
MCnn: Resizing value
nn: 05 ~ 95 (5 incremental)
TT xxxxxxxxxxxx: Memory tag (up to 12 characters)
MQnnmm:
(Memory channel)
Frequency (MHz)
nn: Bank number
mm: Memory channel