Memory Channel; Memory Read Mode - AOR AR5001D Manual

LC
(Note: The FS, FT commands cannot be used alone.
They must always be used in conjunction with the FF command.)
3-6

MEMORY CHANNEL

The AR5001D features 2,000 memory channels (50 channels in each of the 40 banks).
The number of memory banks can be reconfigured between 5 ~ 95 (in 5 incremental).
3-6-1

MEMORY READ MODE

MR MRmmnn
To read: MRmmnn<CR>
All manuals and user guides at all-guides.com
FFmm Search bank (two digits)
(mm: 00 ~ 39)
FSnn FFT search step frequency
(nn: 00 ~ 10)
00: 5 kHz
01: 6.25 kHz
02: 8.333 kHz
03: 9 kHz
04: 10 kHz
05: 12.5 kHz
06: 20 kHz
07: 25 kHz
08: 30 kHz
09: 50 kHz
10: 100 kHz
FT-ddd Threshold level. Once set, only signals over this level
will be detected by FFT search.
-ddd: (0 ~ 110 dB) (default: -80) (dB)
LCn n: 0, 1
0: Disable search result frequency report
1: Enable search result frequency report
mm: 00 ~ 39 (Memory bank)
nn: 00 ~ 99 (Memory channel) (default: 00)
(default)
(default: 00)
29