Em8200 Memory Bank Save And Load; Em8200 All-Srch Save And Load - AOR AR8600 Operating Manual

to start the data load. The legend "EXT-MEM LOADING !!" will be displayed with the
exclamation marks flashing to indicate that loading is in progress. The memory load process will take
over 20 seconds to complete. Once the load is complete, the LCD will revert to its previous display
(VFO, scan or search etc).

18-7-4 EM8200 MEMORY BANK save and load

The memory data 'saved or loaded' can be specific to one bank only. Memory banks must be saved
and loaded as a pair i.e. A/a, B/b, C/c etc.
Save MEM-BANK (one specific memory bank)
Access the COPY EXT-MEM menu using the key sequence
Select the "SAVE" option,
bank you wish to save using the
cursor to the left of the "ALL-DATA" legend, use the
key to move the cursor to the right of the legend "MEM-BNK" to enable selection of the desired memory
bank to save. Use the main dial,
to start the memory data save. The legend "EXT-MEM SAVING !!" will be displayed
with the exclamation marks flashing to indicate that saving is in progress. The memory save process
will take a couple of seconds to complete. Once the save is complete, the LCD will revert to its previous
display (VFO, scan or search etc).
Load MEM DATA (all memory banks)
It is presumed that you have already saved memory data to one of the four EM8200 memory locations.
Make sure that global write protect is not set or the data load will be unsuccessful and no data will be
loaded.
Access the COPY EXT-MEM menu using the key sequence
Select the "LOAD" option,
bank you wish to save using the
cursor to the left of the "ALL-DATA" legend, use the
key to move the cursor to the right of the legend "MEM-BNK" to enable selection of the desired memory
bank to load. Use the main dial,
to start the memory data load. The legend "EXT-MEM LOADING !!" will be displayed
with the exclamation marks flashing to indicate that loading is in progress. The memory load process
will take a couple of seconds to complete. Once the load is complete, the LCD will revert to its previous
display (VFO, scan or search etc).

18-7-5 EM8200 ALL-SRCH save and load

It is not necessary to save and load all of the data at times when you do not wish your memory banks
etc overwritten. Instead use ALL-SRCH to overwrite all search banks in one go but to leave the memory
banks etc unchanged.
to toggle between load and save. Next select the EM8200
keys or main dial (0, 1, 2 or 3).
keys to select "MEM-BNK".
keys or keypad to select the desired memory bank.
to toggle between load and save. Next select the EM8200
keys or main dial (0, 1, 2 or 3).
keys to select "MEM-BNK".
keys or keypad to select the desired memory bank.
.
the key to move the
the
.
the key to move the
the