Memory Recall - AOR AR8000 Operating Manual

If you are happy with the alphanumeric description press [ENT] and the display
will return to VFO mode.
At any time you may abort the memory input by pressing the [CLEAR] key, the
display will return to VFO mode.
7-2 Memory recall (M.R) - Recalling receive data from memory
Once receive frequency and mode data has been stored into a memory
location, its retrieval is quick and simple.
Let's assume that you wish to retrieve the frequency of 88.3 MHz which has
been programmed into to memory "A00" during the example in the preceding
section 7-1 of this manual.
Press [SCAN] to place the receiver into memory recall mode (M.R). The
legend "M.RE" appears on the top left of the LCD to confirm operation.
The receiver will display a memory channel, mode, frequency and text. If the
desired memory channel is not immediately displayed it may be RECALLED by
keying in the required location.
To recall memory channel "A00" type [1A] [0] [0] there is no need to press
[ENT]
The "M.RE SELECT" menu automatically appears
when the [1A] key is pressed so that the frequency
and comments are displayed on the third and fourth
lines of the LCD for easy recognition.
The receiver will monitor whatever memory channel
first appeared when you entered memory recall
mode.
Memory channel review / hunt
The [DIAL] may be rotated to review, hunt for and select memory channels.
From VFO mode press [SCAN] to enter memory recall "M.RE" mode then
rotate the [DIAL] to select the required memory channel.
This is a useful tool for reviewing memory contents and hunting for a specific
channel when you forget where you stored it! Should you know the number of
the required memory channel, the keypad method of memory recall will be
much faster.
The receiver will monitor whatever memory channel is displayed in "M.RE"
mode.