Program Search - Saving Active Frequencies - AOR AR8000 Operating Manual

13-3 Program search facilities & saving "active" frequencies to memory
Starting manual search
to initiate PROGRAM SEARCH press [SRCH]. The legend "SRCH" appears
on the top left of the LCD to confirm selection.
Changing the direction of manual search
The direction of search may be reversed by rotating the [DIAL] or using the
UP/DOWN keys.
Moving on from active frequencies
Should the receiver stop on an active frequency during program search, you
may force the search to continue by pressing the UP/DOWN keys or rotating
the [DIAL].
To cancel program search
To cancel program search press [2VFO] and the display will return to 2VFO
mode.
Transfer of an active frequency to VFO
Should the search process stop on an active frequency, you may stop the
search process by pressing [ENT]. The receiver will monitor the active
frequency in VFO mode and may be tuned using the [DIAL] or UP/DOWN
keys.
To restart the MANUAL SEARCH process from the start
To start the manual search from the original frequency press [2VFO] to return
to 2VFO mode than press and hold [2VFO] for more than one second to
restart manual search over again.
To resume PROGRAM SEARCH process from the current frequency
You may resume program search from the current frequency by pressing
[SRCH].
To restart the PROGRAM SEARCH process from the start
To start the program search from the start frequency press [SRCH] followed
by the search bank identifying letter (for example [1A].
Writing active frequencies to memory and continuing program search
If an interesting active frequency is found while in program search mode, it
may be written to a memory channel.
Press [ENT] to halt program search while storing the frequency, the active
frequency will be transferred to VFO. Press and hold the [ENT] key for more
than one second to enter memory write mode.