AOR AR8000 Operating Manual page 52

Enter memory data
Switch On. Press [2VFO] to enter 2VFO mode.
Type in the first frequency [8] [8] [.] [3] [ENT]. Press and hold the [ENT] key
for more than one second to access the memory input sub menu. Enter the
first memory location [A] [0] [0] [ENT] then press [ENT] again to ignore the
"TXT" alphanumeric comment section and accept the memory data. The
display returns to 2VFO mode.
Type in the second frequency [9] [9] [.] [5] [ENT]. Press and hold the [ENT]
key for more than one second to access the memory input sub menu. Enter
the second memory location [A] [0] [1] [ENT] then press [ENT] again to ignore
the "TXT" alphanumeric comment section and accept the memory data. The
display returns to 2VFO mode.
Access the "SWAP-MODE" sub menu
To select the "SWAP-MODE" sub menu first access the SET EDIT-CH menu
by keying [FUNC] [8]. Use the UP/DOWN or [DIAL] until the cursor is to the
left of the "SWAP-MODE" option then press [ENT].
The top line of the LCD will alternately flash between "SET EDIT-CH" and
"SWAP-MODE" to indicate that a sub menu has been selected.
The cursor will be positioned over the memory bank identifier (LETTER). Use
the [DIAL] or keypad to select the memory channel which you would like to
move.
The third line will alternate between MODE and STEP while the fourth line will
alternate between TXT and FREQUENCY so that easy identification of the
desired memory channel may be made.
Once you have chosen the "first" memory channel to be swapped press [ENT].
The "first" memory channel number moves to the left hand side of the second
line of the LCD and a symbol "==>" points to another memory channel toward
the right of the second line of the LCD. The cursor is positioned over the new
memory channel. Select the "second" memory channel to be swapped using
the [DIAL] or keypad.
Once you have chosen the "second" memory channel to be swapped press
[ENT].
The memory data from the "first" memory channel will be transferred to the
"second" memory channel and visa versa.
For example, memory channel "A00" now contains the frequency 88.3 MHz
with the mode WFM, step set to AUTO, attenuator OFF and no alphanumeric
comment. Memory channel "A01" now contains the frequency 99.5 MHz with
the mode WFM, step set to AUTO, attenuator OFF and no alphanumeric
comment.