FLn
0: Displays the latest 40 channels (frequencies may duplicate.)
1: Displays the latest 40 channels (frequency not duplicated)
2: Displays 40 channels with the strongest signal
3: Displays 40 channels with the strongest signal
4: Displays most frequently detected signals.
% : Clear search list
3-5-7
COPY SEARCH FREQUENCY LIST TO MEMORY BANK
FM
FMn
0: Copy the latest 40 channels to Memory bank #38
1: Copy the latest 40 channels to Memory bank #38
2: Copy 40 channels with the strongest signal to Memory
3: Copy 40 channels with the strongest signal to Memory
4: Copy most frequently detected signals to Memory bank #38
%: Delete search list
3-5-8
FFT SEARCH
FFT search differs from regular scanning methods (one frequency / step after the other) in that it
provides a spectrum [image] up to 10 MHz wide, sampled 15 times per second.
Although the search bank basic settings for normal search and FFT search are done the same way
(for Low Frequency, High Frequency, and text settings), in FFT search the following parameters must
also be set.
FFT frequency step
Threshold level (signal detection level)
FF
FFmm<SP>FSnn<SP>FT-ddd
All manuals and user guides at all-guides.com
(n: 0 ~ 4, %)
(frequency may duplicate).
(frequency not duplicated.)
(n: 0 ~ 4, %)
(frequencies may duplicate.)
(frequency not duplicated)
bank #38 (frequency may duplicate).
bank #38 (frequency not duplicated.)
28