Internal Loudspeaker - AOR AR8000 Operating Manual

SCAN list.
To toggle the status of select scan, press [FUNC] [PASS] again while in M.RE
mode.
Select scan only scans those specific channels which have been tagged
(registered) using the [FUNC] [PASS] select scan procedure. This is very
useful to allow the rapid selection of a mixture of memory channels irrespective
of memory banks for specific scanning applications.
In 2VFO mode
PASS - While in 2VFO mode, press [PASS] to edit the search pass
frequencies (just as with [FUNC] [PASS] while in search mode).
SELECT SCAN - While in 2VFO mode, press [FUNC] [PASS] to quickly
review, locate and edit the contents of select scan in a "similar" manner to
using [FUNC] [PASS] while in M.RE mode to tag channels for select scan.
[ENT] - Enter key
The enter key is used to finalise the entry of frequency and other data inputs.
While in 2VFO mode, press and hold the [ENT] key to add the currently
displayed frequency into memory through a small menu.
While in SEARCH mode and stopped on a busy channel, press the [ENT] key
to cancel search and remain on the currently displayed frequency.
5-8 Loudspeaker (internal)
The AR8000 is fitted with an internal front facing loudspeaker toward the upper
front cabinet. When an external earphone, headphone or speaker is connected
the internal speaker is automatically disconnected.
Side panel - left hand side
5-9 [FUNC] Function key
FUNC / 2ndF
The AR8000 uses a multi-function keyboard. The function (shift) key is used to
access the second key functions as listed underneath the keypad keys. Other
functions may also be accessed using the function key.
When the function key is operated, a flashing highlight cursor "F" in the lower
left of the LCD indicates activation.
There are two ways in which the [FUNC] key may be operated to suit the
operators preferences. The setting of [FUNC] is made in the CONF-configura-
tion menu accessed in 2VFO mode by pressing [FUNC] [CONF].