Getting Started; Powering The Base Unit On And Off - Barco R5900001 User Manual

3. GETTING STARTED

Overview
•

Powering the Base Unit on and off

• Basic Use
• Advanced Use
• Use of an iOS device with ClickShare Link
• User Interface
• Capture mode: detailed - fast
• Shared desktop: primary - extended
• Audio configuration
• Pairing
3.1 Powering the Base Unit on and off
About power mode
You can power on and off the Base Unit and bring the system in standby mode. In standby mode the system mutes the output signal
to the display. If your display supports this, it will automatically enter power saving mode.
To power on the Base Unit or awake it from standby
1. When the Base Unit is shut down, set the rocker switch at the back of the Base Unit to "I".
Refer to image 3-1.
Image 3-1
Rocker switch
2. If the system does not start up automatically, push the standby button shortly.
Refer to image 3-2.
R5900001 CLICKSHARE 08/07/2013
3. Getting Started
13