Final Steps - Kenmore Electronic three-speed automatic washers Owner's Manual And Installation Instructions

REVIEW INSTALLATION
Take a few minutes to complete
this checklist. It will help assure you
that you have a proper installation
and increase your satisfaction with
your Kenmore washer.
[] Check electrical requirements.
Be sure you have correct electrical
supply and recommended grounding
method.
[] Check that you have:
* All the tools you started with.
* Removed all packaging materials.
* Flemoved shipping strap with
three cotter pins.
° Installed all parts listed on
pages 6-8.
[] Check that:
• The washer is level.
• The nuts on the front legs are tight.
[_ Check that the water faucets are
turned on.
:- -%:£-. ;:;.:'_. _:-i:r- _. :._ h ;'.-
FINAL STEPS
[] Plug power supply cord into
grounded outlet.
[] Remove the blue protective film on
the console and any tape remaining
on washer.
[] Take a few minutes and read the
Operating Instructions (pages 20-36)
to fully understand your new washer.
Then, start the washer and allow it to
complete the HEAVY DUTY Cycle.
19