Final Steps - Kenmore Three-Speed Triple Dispenser Automatic Washers Owner's Manual & Installation Instructions

REVIEW INSTALLATION
Take a few minutes to complete
this checklist. It will help assure you
that you have a proper installation
and increase your satisfaction with
your Kenmore washer,
[ Check electrical requirements.
Be sure you have correct electrical
supply and recommended grounding
method.
[ Check that you have:
• All the tools you started with.
• Removed all packaging materials.
• Removed shipping strap with
cotter pins.
• Installed all parts listed on
pages 7-9.
[ Check that:
• The washer is level.
• The nuts on the front legs are tight.
[ Check that the water faucets are
turned on.
FINAL STEPS
I Plug power supply cord into
grounded outlet.
f Remove the blue protective film on the
console and any tape remaining on
washer.
[ Take a few minutes and read the
Operating instructions (pages 21-29)
to fully understand your new washen
Then, start the washer and allow it
to complete the ULTRA CLEAN cycle.
2O