Kenmore Electronic three-speed automatic washers Owner's Manual And Installation Instructions page 45

Problem Possible Cause Solution
Load is Not removing load promptly. Unload the washer as soon as it st(
Wrinkled
Wrong cycle for fabrics Use cold rinses and cycles with slo\
being washed, sl:in speeds to reduce wrinkling.
Overloading. Loads should move freely during
wash. Wash smaller loads.
Wash water not warm enough Use Automatic Temperature Control
to relax wrinkles. Using warm (ATC). If safe for fabric, use warm or
rinses, hot wash water. Use cold rinse water
Hoses reversed. Reverse hoses
(see "INSTALLATION," Section D).
Load is Overloading. Loads should move freely during
Tangled/ wash. Wash smaller loads.
Twisted
Clothes wrapped around Do not wrap items around agitator
agitator, whe_l loading washer.
Clogged Not diluting softener. Dilute fabric softener in dispenser.
Dispensers/
Bleach Use of color-safe bleach in Acid color-safe bleach directly to the
Leaking/ chlorine bleach dispenser, basket or detergent dispenser. Do
Bleach on not use chlorine bleach dispenser,
Wrong Loads
Improper use of chlorine bleach. Always measure bleach before adding
to the dispenser. Carefully pour into
the, dispenser. Wipe up bleach spills.