Final Steps - Kenmore Galaxy One-speed automatic washer Owner's Manual And Installation Instructions

REVIEW INSTALLATION
Take a few minutes to complete
this checklist. It will help assure you
that you have a proper installation
and increase your satisfaction with
your Sears washer.
Check electrical requirements.
Be sure you have correct electrical
supply and recommended grounding
method.
Check that you have:
• All the tools you started with.
• Removed all packaging materials.
• Removed shipping strap with
cotter pins,
• Installed all parts listed on
pages 7-9.
Check that:
• The washer is level.
• The nuts on the front legs are tight.
Check that the water faucets are
turned on.
FINAL STEPS
[ Plug power supply cord into
grounded outlet.
[ Remove the blue protective film on
the console and any tape remaining
on washer.
Take a few minutes and read the
Operating Instructions (pages 21-23)
to fully understand your new washer.
Then, start the washer and allow it to
complete the REGULAR cycle.
20