Installation Instructions; Location; Window Kit Installation - NewAir AC-12100E Owner's Manual

iNSTALLATiON iNSTRUCTIONS (optional)
A:30cm-100cm
_: iNSTALLATiON INSTRUCTIONS
Location
® The air conditioner should be placed on a firm
or
o
B:30cm Fig.7
Vertical
window
_
Window Slider Kit
Minimum:1.84ft (56.2cm).
Maximum:3.22ft (98.2cm).
or
Vertical
_window _
Window Slider Kit I [ ill I
Minimum:1.84ft (56.2cm). I _ I
Maximum:3.22ft (98.2cm).1 _ n
Fig.8
Window Slider Kit
Minimum:1.84ft (56.2cm).
Maximum:3.22ft (98.2cm).
or
Window Slider Kit
Minimum:1.84ft (56.2cm).
Maximum:3.22ft (98.2cm).
Fig.9
o
®
0
foundation to minimize noise and vibration. For
safe and secure positioning, place the unit on a
smooth, level floor strong enough to support the unit.
The unit has casters to aid placement, but it should
only be rolled on smooth, fiat surfaces. Use caution
when rolling on carpet surfaces. Do not attempt to
roll the unit over objects.
The unit must be placed within reach of a properly
rated grounded socket.
Never place any obstacles around the air inlet or
outlet of the unit.
Allow 30cm to 100cm of space from the wail with
window for efficient air-conditioning.
Window Slider Kit I.stalla:ion
Your window slider kit has been designed to fit most
standard "vertical" and "horizontaI"window
applications. However, it may be necessary for you to
improvise/modify some aspects of the installation
procedures for certain types of window. Please refer
to Fig. 8 & Fig.9 for minimum and maximum window
openings. Window slider kit can be fixed with a bolt
(see Fig.9a).
Note: If the window opening is tess than the mentioned
minimum length of the window slider kit, cut the piecewith
a hole in it, so that it is the correct size to fit the window
opening. Never cut out the hole in window slider kit.
be\
t
or
Window slider kit Window
slider kit
Ol
Fig9a |
Q