Table of Contents
Advertisement
iNSTALLATiON
iNSTRUCTiONS
(optional)
Foam seal A
type)
Installation
in a double-hung
sash
window
Fig.10
ndow kit
Window stool
or
__ndow
kit
Window stool
Fig.ll
W_I_
ndow kit
Window stool
ndow kit
Window stool
Foam seal
Fig.12
Fig.13
1. Cut the foam seal (adhesive type) to the proper
length and attach it to the window stool. Fig,10
2. Attach the window slider kit to the window stool.
Adjust the length of the window slider kit according
to the width of window;
shorten the adjustable
window
kit if the width of window is less than 22.t inches.
Open the window sash and place the window slider
kit on the window stool. Fig,11
3. Cut the foam seal (adhesive
type) to the proper
length and attach it on the top of the window. Shown
as in Fig,12,
4. Close the window sash securely
against the
window,
5. Cut the foam seal to an appropriate
length and
seal the open gap between the top window sash
and outer window sash. Shown as in Fig.13,
Advertisement
Table of Contents
