Related Manuals for NewAir AC-14100
Summary of Contents for NewAir AC-14100
- Page 1 AC-14100 Portable Air Conditioner AC-14100E, AC-14100H OWNERS MANUAL Read and save these instructions.
- Page 2 Count on NewAir. As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you. Thank you for your purchase and remember NewAir, A Name You Can Trust.
-
Page 3: Table Of Contents
EAD AND SAVE THESE INSTRUCTIONS TABLE OF CONTENTS Safety Information & Warnings ................................. 4 Safe Operation Guidelines ................................. 4 Energy SAving Tips ..................................... 5 Disposal Guidelines .................................... 5 Parts List ........................................5 Parts Diagram ..................................... 6 Assembly & Installation ..................................... 6 Installation ...................................... -
Page 4: Safety Information & Warnings
If the power cord is damaged, it must be replaced by an electrician or specialized technician authorized by the manufacturer in order to prevent fire. Never use an extension cord to connect power to the unit. http://www.NewAir.com... -
Page 5: Energy Saving Tips
ENERGY SAVING TIPS For maximum efficiency: Use the air conditioner in the recommended room size (Up To 525 Square Feet). Keep doors and windows closed while the portable air conditioner is in use. Keep curtains and blinds closed during the sunniest part of the day while the air conditioner is in operation. ... -
Page 6: Parts Diagram
This can be done with the included window kit or by cutting a hole into a wall. The air conditioner should be placed on a firm foundation to minimize noise and vibration. http://www.NewAir.com... - Page 7 The unit has casters to aid placement, but it should only be rolled on smooth, flat surfaces. Use caution when rolling on carpet surfaces. Do not attempt to roll the unit over objects. The unit must be placed within reach of a properly rated grounded socket. ...
-
Page 8: Installing The Activated Carbon Filter
3. Remove the activated carbon filter from its plastic bag. 4. Insert the activated carbon filter into the filter and attach holder. 5. Reattach the filter holder onto the filter (make sure the active carbon filters will be held properly between the two pieces). http://www.NewAir.com... -
Page 9: Operating Instructions
Insert the filter set into the unit. OPERATING INSTRUCTIONS Before you begin, thoroughly familiarize yourself with the control panel and remote control and all its functions, and then follow the symbols for the functions you desire. This unit can be controlled by the unit control panel alone or with the remote control. CONTROL PANEL DIAGRAM BUTTONS 1. -
Page 10: Control Operation
The exhaust hose will still need to be fitted onto the unit in order for the cold air to be removed. When in heating mode, the machine can be set on HIGH or LOW speed. http://www.NewAir.com... -
Page 11: Energy Efficiency Boosting Function
DEHUMIDIFICATION FUNCTION: ERROR MESSAGES: When the air conditioner is in dehumidification mode, This machine is equipped with a self-diagnosis the temperature cannot be adjusted, and the fan function. If there is an error with the air conditioner, speed will automatically be set to low. the LCD screen will display “E1”... -
Page 12: Automatic Functions
5. Repeat until the water reservoir is completely empty. 6. Replace the water plug back into the drainage port and make sure it is firmly in place. 7. Turn the unit back on. The warning signal should be off. http://www.NewAir.com... -
Page 13: Continuous Drainage
CONTINUOUS DRAINAGE To operate the unit continuously without manually emptying the tank, follow these steps: 1. Remove the drain plug from the back of the unit and retain it for future use. 2. Connect the drainage hose included with the unit to the drainage port as shown. -
Page 14: End Of Season Storage
3. Clean or change the filter. 4. Unplug and store the power cord behind panel as shown. 5. Place the unit back in its original carton and store it in a clean, dry area. http://www.NewAir.com... -
Page 15: Troubleshooting
TROUBLESHOOTING Problem Possible Causes Solution The air conditioner does The unit may be plugged in using Check if using the wrong voltage. not function. a different voltage. The circuit breaker may be Reset the circuit breaker or check for a tripped or there is a blown fuse. -
Page 16: Limited Manufacturer's Warranty
When making a warranty claim, please have the original bill of purchase with purchase date available. Once confirmed that your appliance is eligible for warranty service, all repairs will be performed by a NewAir™ authorized repair facility. The purchaser will be responsible for any removal or transportation costs.