Related Manuals for NewAir AC-12000E
Summary of Contents for NewAir AC-12000E
- Page 1 PLEASE READ AND SAVE THESE INSTRUCTIONS NewAir AC-12000E, AC-12000H Portable Air Conditioner Owner's Manual...
- Page 2 k0045 GENERAL SAFETY INSTRUCTIONS: • ALWAYSOPERATETHE UNIT IN AN UPRIGHT POSITIONAND PLACE IT ON A FLAT, LEVEL SURFACE AT LEAST 14 INCHESAWAYFROMANY OTHER OBJECTS (Fi8 1 & 4). • DO NOT PLACEOBJECTSON THE UNIT, AND DO NOT COVEROR OBSTRUCTTHE INLET OR OUTLET GRILLS (FIG.
- Page 3 k0045 Front: Back: Air filter Control panel Louvers Air inlet Carrying handle Cord storage Casters Exhaust air outlet Rubber plug / drainage point Accessories: Exhaust hose Hose adaptor (goes over the hose and into the window kit) Extendable window kit Activated carbon filter Hose for continuous...
- Page 4 k0045 Installing the Exhaust Hose and Window Kit: Wall or Window Window Kit Adapter FIG.5 FIG.6 Open the window and insert the window kit into the open gap. Close the window until the window kit is held securely. This technique may also be used for sash windows.
- Page 5 k0045 Positioning the Exhaust Hose: Insert the exhaust hose into the back of the unit and tighten it into place. FIG.7 Avoid kinks and bends in the exhaust hose. This can cause moist air to accumulate, resulting overheating unexpected shut offs. The exhaust hose may be FIG.8...
- Page 6 k0045 Installing the Activated Carbon Filter: Remove the filter frame from the unit. Separate the filter from the filter frame. Remove the activated carbon filter from its plastic bag. insert the activated carbon filter into the filter frame. Reattach the filter onto the filter frame.
- Page 7 k0045 Control Panel WATER FULL ......1_3_ FIG.12 Fan speed (ventilation) button Power indicator Timer button Full water tank indicator Display window ON/OFF (power) button Remote control receiver Sleep mode button Heater indicator (for AC-12000H only ) Ionizer button Mode selection button Compressor indicator Automatic mode indicator Ionizer indicator...
- Page 8 k0045 Setting the Mode/Function: Press the MODE button to select the desired mode (cooling, fan or heating). Heating mode is only available on the AC-12000H. The selected mode's indicator light will turn on. Setting the Temperature: Press the "Up" or "Down" button to change the set temperature. The display window will indicate the set temperature.
- Page 9 k0045 Heating Mode: When the air conditioner is in heating mode, ambient warm air is recycled and used to heat your immediate area. The exhaust pipe will still need to be fitted onto the unit in order for the cold air to be removed. When in heating mode, the machine can be set on HIGH or LOW speed.
- Page 10 k0045 During the cooling process, some water will be extracted from the air and stored within the unit's water reservoir. If the water reservoir is full, both the compressor and motor will stop and the unit will beep (press any button to stop the beeping sound).
- Page 11 k0045 For Continuous Drainage: • Remove the rubber plug from "\4 the drainage port and retain it for future use. • Connect the drain tube to the drainage port as shown (fig. 17). Rubber p ugi ..Drain knob • Connect the other end of the hose to a drain.
- Page 12 k0045 For Heating Mode: While using the heating function, please note the following: In order to properly exhaust cool air, make sure the exhaust hose and window kit are properly installed (refer to page 6 for instructions). Set up the air conditioner continuous drainage using the drain tube (refer to page 13 for...
- Page 13 k0045 Always unplug the air conditioner from the power supply before cleaning. To maximize the efficiency of the air conditioner, regularly clean the unit. Cleaning the Housing: • Use a soft, damp cloth to wipe the body clean • Never use harsh chemicals, gasoline, detergents, chemically treated cloths, or other cleansing solutions...
- Page 14 k0045 The air conditioner does not work. • Is the air conditioner plugged in? • Is the power outlet functioning correctly? • Is the full water tank indicator light flashing? • Is the ambient room temperature lower than the set temperature? The unit does not produce adequate •...
- Page 15 Model Number: AC-12000E AC-12000H Power Consumption for 1166W / 11A 1166W/11A Cooling* Power Consumption for 1054W/10.1A Heating * Air Volume (max. speed) 440ma/h 440ma/h Dehumidification Capacity 1.2L/hour 1.2L/hour Voltage / Frequency 115V, 60Hz Compressor Type Rotary Refrigerant Type R-410A...