Water Full Alarm; Operating Instructions - NewAir NAC14KWHD3 Owner's Manual

Table of Contents

Available languages

Installing the window slider kit:

The window slider kit included with this appliance can accommodate horizontal

or vertical installation. As shown in Fig.10 and Fig.10a, check the minimum and

maximum size of your window before installation.

1. Install the window kit in the window (Fig.10, Fig.10a);

2. Adjust the length of the window slider kit according to the window width or

height and affix it with the dowel.

3. Insert the window connector hose into the hole in the window kit.

(Fig.10)

(Fig.10a)

WATER TRAY FULL ALARM

The water tray inside the air conditioner has a water level safety switch that

controls the water level. When the water level reaches a specified height, the

associated indicator light will illuminate. (If water pump is damaged, when the

water tray is full, please remove the rubber plug at the bottom of the unit to

drain water).

www.newair.com

Table of Contents

Chapters

Table of Contents