Setting Spool Pins; Presser Foot L Per; Thread Cutter; Accessory Box - Kenmore 385.15212 Owner's Manual (Operating Fundamentals)

Setting Spool Pins
(_ Spool pin
The spool pins are used for holding the spools of thread
when feeding the thread to the machine.
To use, pull up the spool pins. Push down for storage.
Presser Foot Lifter
(_) Presser foot lifter
(_ Normal up position
@ Highest position
The presser foot lifter raises and lowers the presser foot.
You can raise t about 1/4" (0.6 cm) higher than the normal
up position for easy removal of the presser foot. or to help
place heavy fabric under the foot.
Thread Cutter
(_ Thread cutter
You do not need a pair of scissors to cut threads after
sewing. Simply use the built-in thread cutter.
Accessory Box
Open the cover of the accessory box toward you. The
sewing accessories are conveniently located in the box.